DFX-7 Flaw Detector

Giá bán: Liên hệ

Thông tin sản phẩm

Thương hiệu

DAKOTA

Model

DFX-7

Xuất xứ

Mỹ

Đơn vị tính

Chiếc

Bảo hành

Tình trạng hàng hóa

Màu sắc

Tồn kho

Còn hàng

Liên hệ

Phòng kỹ thuật

Phòng kế toán

Phòng kinh doanh

Điện thoại

Chi tiết sản phẩm

Thickness Gauge
Sizing Toolkits: DAC, AWS, TCG, DGS.
Exception visibility in sunlight (AMOLED) color VGA display (320×240 pixels).
P.R.F. – 8 to 2000 Hz, adjustable.
Screen Refresh Rate: 60 Hz
Detection: Z-Cross, Flank & Peak.
Flaw Detector
Automatic: probe zero, probe recognition, and Temperature compensation.
Measurement: Variety of modes to address a number of applications.
Large data storage with multiple formats: Alpha numeric grid and sequential w/auto identifier.
Windows PC & MAC OSX interface software.
2 year limited warranty.

FLAW DETECTOR: FEATURES

TRIG: Trigonometric display of beam path, depth, surface distance, and curved surface correction. Used with angle beam transducers.
DAC: Up to 8 points may be entered and used to digitally draw a DAC curve. Reference -2, -6, -10, (-6/-12), (-6/-14), (-2/-6/-10) dB. Amplitude displayed in %DAC or dB.
AWS: Automatic defect sizing in accordance with AWS D1.1 structural welding code.
AVG/DGS: Automatic defect sizing using probe data. Stores up to 64 custom setups.
TCG: Time corrected gain. 50 dB dynamic range, 20 dB per microsecond, up to 8 points for curve definition.
Measurement Mode: Pulse-Echo (P-E) range 0.025 in to 100 ft. (0.63mm to 3048 cm).
Auto-Cal: Provides automatic calibration with two reference points.
Detection Modes: Zero Crossing, Flank and Peak.
Display Freeze: Hold current waveform on screen.
Peak Memory: For echodynamic pattern determination.
Skip Bar: Displays skip legs in the waveform area.
THICKNESS GAUGE: FEATURES

Measurement Modes (Dual & Single Element):
Pulse-Echo Mode (P-E) – (Pit & Flaw Detection) range 0.025 to 96 in (0.63mm to 244 cm). Single Contact – 0.040 in to 100 ft. (1 mm to 3048 cm).
Pulse-Echo Coating Mode (PECT) – (Material, Coating, Pit & Flaw Detection): Material: 0.025 in to 96 in (0.63mm to 244 cm). Coating: 0.001 to 0.100 inches (0.01 to 2.54 millimeters).
Pulse-Echo Temp Comp Mode (PETP) – (Pit & Flaw Detection) Auto temperature compensation – range 0.025 in to 96 in (0.63 mm to 244 cm).
Echo-Echo Mode (E-E) – (Thru Paint & Coatings) range 0.050 to 4.0 inches (1.27 to 102 millimeters). Single Delay Line – 0.007 to 1.00 in (.178 to 254 mm). Single Contact – 0.040 in to 10 ft. (1 mm to 305 cm). Will vary based on coating.

Thông số kỹ thuật

Size: 2.5W x .5H x 1.24D in (63.5 x 165 x 31.5mm).
Weight: 14 ounces (.397kgs), with batteries.
Case: Extruded aluminum body with nickel plated aluminum end caps (gasket sealed).
Display: 1/4 VGA AMOLED color display (320 x 240 pixels). Viewable area 1.7 x 2.27 in (43.2 x 57.6 mm). 16 color pallete, multiple color options, and variable brightness.
Screen Refresh Rate: Selectable 60Hz.
Display Views: Flaw Detector: Full wave, +/- Rectified, or RF. Thickness Gauge: Digits, +/- Rectified, RF, or B-Scan.
Resolution(selectable): +/-0.001 in (0.01 mm), or +/-0.0001 in (0.001 mm).
Timing: Precision TCXO timing with single shot 100 MHz 8 bit ultra low power digitizer.
Measurement Gates: Two independent gates (Flaw), and three gates (thickness). Start & width adjustable over full range. Amplitude 5-95%, 1% steps. Positive or negative triggering for each gate with audible and visual alarms.
Operating Temperature: 14 to 140F (-10C to 60C).
Environmental: Meets IP65 requirements.