DA-400 Contour Probe

Giá bán: Liên hệ

Thông tin sản phẩm

Thương hiệu

Parker Research

Model

DA-400

Xuất xứ

USA

Đơn vị tính

Bảo hành

Tình trạng hàng hóa

Màu sắc

Tồn kho

Còn hàng

Liên hệ

Phòng kỹ thuật

Phòng kế toán

Phòng kinh doanh

Điện thoại

Chi tiết sản phẩm

IP51
VERSATILITY AND POWERFUL PERFORMANCE IN A LIGHTWEIGHT (8.5 LBS.) INSTRUMENT
CONSTANT AC OR HALF WAVE RECTIFIED (DC) FIELDS WITH THE FLIP OF A SWITCH FOR THE LOCATION OF SURFACE AND SOME SUB-SURFACE DEFECTS
APPLY CONTINUOUS FIELDS AND DEMAGNETIZE TOO
USE WITH DRY POWDER, WET FLUORESCENT OR VISIBLE
HIGH IMPACT MOLDED HOUSING
ONE YEAR REPAIR/REPLACEMENT GUARANTEE
OPTIONAL Y-400 YOKE LIGHT WHERE SHOWN IS AVAILABLE AT ADDITIONAL COST.
230VAC MODEL AVAILABLE WITH CE CERTIFICATION AT AN ADDITIONAL COST

The DA-400 Contour Probe is a portable, self-contained instrument designed to produce a magnetic field on or within ferrous-magnetic materials.

The selective AC and DC functions are built into a single reliable instrument. The AC mode produces an intense AC field for detection of surface defects and demagnetizing after inspection. The DC mode produces an intense Half Wave Rectified (DC) field for detection of some subsurface defects.

Controls and solid-state electronics are contained within the high impact molded housing. Articulating legs allow the AC or DC field to be applied to the precise area of inspection on nearly any part of the surface shape… in the lab, factory or field site.

All Parker Contour Probes comply with the requirements of applicable specifications.

Thông số kỹ thuật

SPECIFICATIONS

Unit	DA-400	DA-400S	A-410	A-410S
Physical	10 H × 8 L × 2.25 W
Line Voltage Single Phase	115 VAC 50/60 Hz	230 VAC 50/60 Hz	115 VAC 50/60 Hz	230 VAC 50/60 Hz
Line Current	6 A AC/DC	3 A AC/DC	6 A AC	3 A AC
Duty Cycle	2 minutes on – 2 minutes off
Weight	8.5 lbs (3.8 kg)
Construction	Glass-filled nylon housing 10 foot (3 m) 3-wire power cord
Span	12 in. (305 mm) across poles
Field	AC/DC	AC/DC	AC	AC